| Common Specifications | |||
| Solenoid Enclosures | Standard Enclosures | Optional Enclosures | Electrical | Valves listed in this series have Red-Hat II molded
epoxy solenoids. Red-Hat II valves are identified by
the change letter "G" and "H" in
their catalog numbers, e.g., 8345G1 or 8345H1. |
Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose and Watertight | Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination
Explosion proof and Watertight. To order, add prefix
"EF" to catalog number. Additional constructions are available. The Optional Features Section contains descriptions and ordering information for: Open Frame Solenoids · Junction Box Enclosures · Panel Mount Constructions. Leakage: Liquids: none; Air: slight leakage through exhaust when energized. |
Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz
(or 110, 220 volts, AC, 50 Hz) 6, 12, 24, 120, 240 volts, DC Other voltages are available when required. Coil: Continuous duty molded Class F. |
| Nominal Ambient Temperature Ranges | Valve Parts in Contact with Fluids | Ordering Information | |
| Construction:32°F to 125°F. DC Construction: 32°F to 104°F. |
Body-- Brass or 316 S.S., as listed Seals and Disc -- Buna "N" and Nylon Core Tube -- 305 s.s. Core and Plug nut -- 430F s.s. Springs -- 302 s.s. Shading Coil -- Copper Piston -- Nylon |
Important: We must have catalog number,
voltage and Hertz, operating
pressure and fluid handled. Use strainers
with Solenoid Valves. |
|
| IMPORTANT: A minimum operating pressure differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted. ASCO flow controls and other similar components must be installed in the cylinder lines only. | |||
Specifications (English Units) | ||||||||||||||||||||
| Standard Solenoid Enclosures Red-Hat II - Types 1, 2, 3, 3S, 4 and 4X |
Watt Rating/Class of Coil Insulation | Max Fluid Temp. F |
Pipe Size |
Orifice Size (ins.) |
CV Flow Factor |
Operating Pressure Differential (psi) | ||||||||||||||
| Brass Body1 | S.S. Body2 | Constr. Ref. No. | Min | Max. AC | Max. DC | |||||||||||||||
| Catalog Number | Catalog Number | AC | DC | AC | DC | Inlet | Exh. | Press. | Exh. | Air Inert Gas |
Water | Light Oil @ 300 SSU | Air Inert Gas |
Water | Light Oil @ 300 SSU | |||||
| Normally Open (Open when de-energized) | ||||||||||||||||||||
| 8345G001 | EV8345G081 | 1 | 10.1/F | 11.6/F | 180 | 104 | 1/4 | 1/16 | 3/32 | 0.09 | 0.09 | 10 | 150 | 150 | 150 | 100 | 100 | 100 | ||
| Normally Closed (Closed when de-energized) | ||||||||||||||||||||
| 8345H003 | --------- | 2 | 10.1/F | 11.6/F | 180 | 104 | 1/4 | 1/16 | 3/32 | 0.09 | 0.09 | 10 | 150 | -- | -- | 100 | -- | -- | ||
|
||||||||||||||||||||