Solenoids, Solenoids Valves, Solenoids Operators

Common Specifications
Solenoid Enclosures	Standard Enclosures	Optional Enclosures	Electrical
Solenoids and solenoid operators listed in this series have either Red-Hat metal enclosures, or are Red-Hat II molded epoxy constructions identified by the change letter "G" in their catalog numbers, e.g., 8200G1, and are shown in red.	Red-Hat -- Type 1 General Purpose Red-Hat II -- Types 1, 2, 3, 3S, 4 and 4X Combination General Purpose and Watertight.	Red-Hat -- Types 3, 7 and 9 Combination Explosion proof and Rain tight. To order, add prefix "EF" to catalog number. Red-Hat II -- Types 3, 3S, 4, 4X, 6, 6P, 7 and 9 Combination Explosion proof and Watertight. To order, add prefix "EF" to catalog number.	Standard Voltages: 24, 120, 240, 480 volts, AC, 60 Hz (or 110, 220 volts, AC, 50 Hz) 6, 12, 24, 120, 240 volts, DC (solenoid operators only) Other voltages are available when required. Coil: Continuous duty molded Class F.
Nominal Ambient Temperature Ranges	Valve Parts in Contact with Fluids	Ordering Information
AC Construction: 32°F to 125°F. DC Construction (solenoid operators only): 32°F to 104°F.	Core Tube -- 305 s.s. Core and Plug nut -- 430F s.s. Seal -- Buna "N" Shading Coil -- Copper Additional Solenoid Operator Parts: Disc -- Buna "N" and Nylon (3 way upper disc) Spring -- 302 s.s.	Important: We must have catalog number, voltage and Hertz, operating pressure and fluid handled. Use strainers with Solenoid Valves.	CSA certified. Additional constructions are available. The Optional Features Section contains descriptions and ordering information for: Open Frame Solenoids · Junction Box Enclosures · Panel Mount Constructions.

Standard Solenoid Enclosures Red-Hat - Type 1 Red-Hat II - Types 1, 2, 3, 3S, 4 and 4X		Orifice Size (ins.)	Cv Flow Factor 4	Operating Pressure Differential (psi)						Max. Fluid Temp.(°F)		Watt Rating/ Class of Coil Insulation 6		Optional Inserted Seat
Catalog Number	Const. Ref. No.			Max. AC			Max. DC			AC	DC	AC	DC
Catalog Number	Const. Ref. No.			Air- Inert Gas	Water	Lt. Oil @ 300 SSU 5	Air- Inert Gas	Water	Lt. Oil @ 300 SSU 5	AC	DC	AC	DC
2 Way Solenoid Operators ¹, Normally Closed (closed when de-energized)
8200G1	4	³/64	0.06	750	600	400	325	225	300	180	120	6.1/F	10.6/F	096-429-4 ²
8200G1	4	³/32	0.17	275	200	130	110	100	100	180	120	6.1/F	10.6/F	180-222-5D ³
8200G1	4	¹/8	0.35	135	115	90	50	50	50	180	120	6.1/F	10.6/F	180-222-1D ³
3 Way Solenoid Operators ¹, Normally Closed (closed when de-energized)
8329G1	5	³/64	0.04	230	230	230	120	140	125	200	150	10.1/F	11.6/F	096-429-4 ²
8329G2	5	³/64	0.06	750	600	400	325	225	300	180	120	10.1/F	11.6/F	096-429-4 ²
8329G3	5	³/64	0.06	750	600	400	325	225	300	180	120	10.1/F	11.6/F	180-222-1D ³
3 Way Solenoid Operators ¹, Normally Open (open when de-energized)
8329G7	5	³/64	0.04	300	300	200	200	300	120	200	150	10.1/F	11.6/F	096-429-4 ²
8329G8	5	³/32	0.15	175	175	175	70	90	45	200	150	10.1/F	11.6/F	096-429-3 ²
8329G9	5	¹/8	0.25	90	90	90	40	40	25	200	150	10.1/F	11.6/F	180-222-1D ³
Larger operators, orifice sized and higher pressure ratings are available. Contact Leighton Stone Corporation for more information. Inserted seat has ¼-32 thread for threading into cavity. Inserted seat has ³/8-32 thread for threading into cavity. Cv will depend upon size and location of connecting passages. Maximum viscosity for 3 way solenoid opearator is 45 SSU. On 50 Hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts.

Solenoids/Solenoid Operators