Steam Valves are rugged, direct-acting or pilot-operated two way solenoid valves. These are suitable for heavy-duty steam applications such as laundry, dry cleaning, molding, steam irons, steam atomization, steam baths, sterilizers and autoclaves
| |
| Asco Steam Valves |
|
| Available with two operations: |
| Normally Closed |
Normally Open |
| When de-energized, the pressure port is closed and the cylinder port is connected to the exhaust port; when energized the pressure port is connected to the cylinder port. |
When de-energized, the pressure port is connected to the cylinder port and the exhaust port is closed; when energized, the pressure port is closed. |
|
| Red-Hat and Red-Hat II Steam Valves |
| These rugged, direct-acting or pilot-operated two way valves are suitable for heavy-duty steam applications such as laundry, dry cleaning, molding, steam irons, steam automization, steam baths, sterilizers and autoclaves requiring fluid temperatures to 388 degrees Fahrenheit. Pipe sizes 1/8" to 2-1/2" NPT. |
|
|
| Angle-bodied Steam Valves |
|
 |
 |
|
| These auxiliary-piloted, 2 way angle body piston valves feature an extra stable shaft with oversized bearings for extended service life. They have been tested to over one million cycles. Pipe sizes 1/2" to 2" NPT. |
| A preloaded stem seal and DuPont Dow Viton® elastomer shaft "wiper" allow these valves to be used in aggressive and corrosive services. The watertight actuator head is double-walled for superior strength. |
| One-piece cold rolled stainless steel stem supported by oversized bearings provide long life. |
| Fluid passes under the valve's seat to eliminate damaging water hammer. A reversed flow version for rapid cycling steam applications is also available. |
| The valves can handle back pressures to their full rating. |
| Fluids handled: Air, water, inert gas, oil, light slurries and steam. |
|
Call - (877) 285- 3600 or
Mail for assistance
